BFKSN - M-430 CEMENT TYPE I MMM-A-105
- MSDS: BFKSN
- Manufacturer: SEAGRAVE CORP TITANINE DIV
- Product Name: M-430 CEMENT TYPE I MMM-A-105
- National Stock Number: 8040-00-664-7073
Product Identification
Product ID:M-430 CEMENT TYPE I MMM-A-105
MSDS Date:05/05/1987
FSC:8040
NIIN:00-664-7073
MSDS Number: BFKSN
Responsible Party
CARLSTADT, NJ 07072-2302
US
Emergency Phone: (201)933-1000
Info Phone: (201)933-1000
Cage: 78767
Contractor
Telephone: 201-437-6500
Cage: 70372
Ingredients
LACTOL SPIRITS
CAS: 64742-89-8
Fraction By Weight: Fraction by Wt
OSHA PEL N/K
ACGIH TLV: N/K
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: Fraction by Wt
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: Fraction by Wt
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: Fraction by Wt
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: Fraction by Wt
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:PALE, NAUSEOUS, DIZZY, WEAKNESS.
CHRONIC:UNKNOWN.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:POSSIBLE
DIZZINESS,HEADACHE,NAUSEOUS,WEAK/IRRITATION.
Medical Cond Aggravated by Exposure:UNKNOWN.
First Aid
First Aid:TREAT SYMPTOMATICALLY-CONSULT PHYSICIAN.EYE-FLUSH IMME W/LGE
AMTS OF WTR FOR AT LEAST 15 MIN.TAKE TO PHYSICIAN.INHAL:REMOVE TO
FRESH AIR.RESTORE BREATHING(GIVE O*2/ARTIFICIAL RESPIRATION), TREAT
SYMPTOMATICALLY-CONSULT PHYSICIAN.INGES:DRINK 1-2 GLASSES OF WATER
TO DILUTE.DO NOT INDUCE VOMITING.CONSULT PHYSICIAN.SKIN:WASH W/SOAP
& WTR,RMOV CONTAM CLTHNG,CONSULT PHYS IF NEEDED.
Fire Fighting
Flash Point Method:TCC
Flash Point:21F/-6.1C
Lower Limits:1.4
Upper Limits:12.0
Extinguishing Media:CO*2,DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .DO NOT USE WATER-EXCEPT W/FOG NOZZLES.
Unusual Fire/Explosion Hazard:DO NOT USE ON HOT SURF/IN AREAS WHERE
ELEC SPRK MAY BE PRESENT/WHERE STATIC CHARGE MAY BE GENERATED.DUE
TO EXTREML HEAT EXPO,PRESS MAY BLD UP IN CLOSED(SUP DAT)
Accidental Release
Spill Release Procedures:REMOVE ANY SOURCE OF SPARK/FLAME, PROVIDE
IMMEDIATE VENTILATION, AVOID BREATHING VAPORS & WEAR APPROPRIATE
RESPIRATOR. ADD ABSORBENT TO SPILL, PLACE IN SEALED METAL
CONTAINERS USING NON-SPARKING TOOLS .
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:STORE IN RED LABEL AREA IN ORIGINAL
CONTAINERS.
Other Precautions:GROUND ALL EQUIPMENT & CONTAINERS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED CHEMICAL FILTERS
DESIGNED TO REMOVE A COMBINATION OF PARTICLES/VAPORS. IN CONFINED
AREAS USE APPROVED AIR LINE TYPE RESPIRATORS/HOODS.
Ventilation:NECESSARY, LOCAL EXHAUST-RECOMMENDED,
MECHANICAL(GENERAL)-ACCEPTABLE. SPECIAL-WEAR DUST MASK WHILE SANDNG
DRY PAINT FILM
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKER GOGGLES.
Other Protective Equipment:APRON & BOOTS RECOMMENDED.IF SKIN CONTACT IS
LIKELY USE PROTECTIVE SKIN CREAM.EYE BATH & SAFETY SHOWER.
Work Hygienic Practices:N/K
Supplemental Safety and Health
BP:79.4-126.1C.% VOLT:N/K-PH:N/K-UNU FR&EXPLO HAZ:CNTNR,WHCH MAY
EXPLODE.WTR MAY BE USED TO COOL UNRUPTURED CONTAINERS.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:175-259F
Melt/Freeze Pt:M.P/F.P Text:N/APPLICABL
Decomp Temp:Decomp Text:N/K
Vapor Density:HV THN AIR
Spec Gravity:0.86
Evaporation Rate & Reference:N/K
Solubility in Water:NONE
Appearance and Odor:LIQUID-MILD
Corrosion Rate:
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:EXCESSIVE HEAT & FIRE.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:HIGH TEMPERATURE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.